How to Unlock iPhone 3.1.3

by Sebastien on February 7th, 2010

This guide and tutorial will show you how to unlock iPhone 3.1.3 using UltraSn0w or BlackSn0w, depending on your iPhone baseband.

The first step is to jailbreak your iPhone 3.1.3, either with RedSn0w or with PwnageTool. Note that PwnageTool is the preferred method as it helps preserve the baseband.

You can use UltraSn0w to unlock these basebands:

  • 04.26.08
  • 05.11.07
  • 05.12.01
  • 05.13.04

To find out what your baseband is, go to Settings > General > About > Modem Firmware.

How to unlock iPhone 3.1.3 with UltraSn0w

  • Launch Cydia.
  • Add the following source to Cydia repo666.ultrasn0w.com (note there is a “0″ in sn0w, not an “o”).
  • After installing this source in Cydia, search for “ultraSn0w”.
  • Install UltraSn0w and reboot your iPhone.

How to unlock iPhone 3.1.3 with BlackSn0w

  • Launch Cydia.
  • Add the following source: http://blackra1n.com.
  • After installing this source in Cydia, search for “BlackSn0w”.
  • Install BlackSn0w and reboot your iPhone.

Your iPhone should now be unlocked. If you have questions or comments on how to unlock iPhone firmware 3.1.3, please leave a comment.

UPDATE: This post is outdated. Check out our unlock section for the latest information about iPhone unlocking.

 
 

198 Responses

  1. When do you think they will come out with a jailbreak for 5.12.01 baseband?? Like this week, next month or when ipad comes out. Please reply someone.. I have been trying tojailbreak my iPhone for forever. I have an Iphone 3gs 3.1.3 firmware,5.12.01 baseband, and MB model. Thank you in advance. Please reply.

     
  2. ok dude i downloaded blackrain or w/e its called. i had previously had my friend unlock my iphone before, its an older model. but when i went to run the software blackrain, itunes gave me the option to restore my phone, but idk if u should do that or not b/c it said all info would be erased? should i do i anyway please help asap my phone is very important for the things i do with church and school thank you.

     
  3. i have iphone 3gs and i updated it to 3.1.3 and now its peace of shit i cant even wipe my ass with it

     
  4. @Jamal There is no estimate date. No one knows.

    @RJ Please give details. What iPhone, firmware, baseband, etc…

     
  5. Sebastien, since you have a Mac, can you save us one time by creating a clean custom firmware 3.1.3 for iPhone 3GS with only Cydia in it?

     
  6. help me ALL my iphone 3.1.2 modem firmware 05.12.01 how to unlcok help me pls

     
  7. Peter Jansen says: February 8, 2010 at 3:57 am

    @ Nixon:
    What’s not clear in this sentence: “….If your baseband is at 05.12.01, you cannot unlock at this time. No one knows if we’ll ever be able to unlock this baseband….” ?

     
  8. Hi there, the wife has an 8gb original iphone. She of course didnt ask me and upgraded to 3.1.3. I went through the tutorial and used pwnage to jailbreak it. It seems ok since i get the pineapple and cydia is on the phone now. It still says no sim card. I tried Ultrasn0w but it still isnt working. We are on Tmobile.

    My Modem Firmware says 04.05.05_G

    Can you help?

     
  9. Sebastien, I dont understand one thing: If i have an iphone 3gs (old boot) firmware 3.1.2 and baseband 5.11.07, and I restore it with a custom 3.1.3 firmware (created by pwnage tool=no baseband update) I will have an iphone 3gs firmware 3.1.3, and 5.11.07 baseband, right?? well, could i stiil unlock it using blacksn0w?? even with this 3.1.3 firmware??? so…the only important thing to keep in mind at unlocking time is the baseband number??? Please, answer me because I dont know if i shoul restore it with this custom 3.1.3 firmware or not…Thanks in advance!!! Read you on twitter!!!

     
    • @Sebastian Yes to all your questions. But I suggest you do not update. Stay at 3.1.2. You’re fine.

       

      • laura allen says: August 29, 2010 at 12:06 pm

        do you happen to know… I have an old iphone- original… it was locked and I could not remember the passcode… my husband googled how to unlock (?)- my question is- would it have deleated all the content that was on the phone? inorder to restore for using for games- or- could he have unlocked and seen all of my content re: text etc- the phone is clean now of all- but- I want to know- would he have had access to the content by hooking up to itunes to break in?- does this make sense? thanks for input…

         
  10. Still Tethered?

     
  11. Hi Sebastien, any help or comments for me on my comment above? thanks!

     
  12. hi Sebastien…its been a week since i can’t used my iphone 3gs 3.1.3. modem firmware 05.12.01..Can you give me an update or an information perhaps? i live in the Philippines and it really sucks having an iPhone that doesn’t work…tnx i need to use it with our local sim card(Globe Telecom) please you will be a great help for me tnx

     
  13. hi is there any possiblity or instances that we can downgrade the baseband or the firmware.?from 05.12.01 to a unlockable baseband

     
  14. Thanks Sebastien for tour answer!!! I’ll stay at 3.1.2 i guess, i trust you! Thanks again for tour help!! Sebas.

     
  15. What is with you people that makes you ask the same questions even if they’ve been answered. An unlock doesn’t seem likely for a while and a baseband downgrade is even mote unlikely at least for a good while

     
  16. Hi Marlon ,
    yes there is a tool in cydia that downgrade your baseband i used it before and works great for me , just search in the packages about ‘Fuzzyband’ , and enjoy ;)

     
  17. Could you help me change modem firmware 5.12.01 to modem firmware 5.11.07?

     
  18. I upgrade form iphone 3.1.2 up 3.1.3, no wave. Change about 3.1.2 is also no wave. Could you help me? Thanks. Modem Firmware 5.12.01!

     
  19. apple suck it!!!! says: February 10, 2010 at 12:41 am

    Downgrade iPhone 3.1.3 (Baseband 05.12.01) To 3.1.2 Using Fuzzyband Downgrader Cydia App

    Apple has recently updated iPhone firmware to 3.1.3, and ever since then, there have been updates to jailbreaking tools such as PwnageTool 3.1.5, redsn0w 0.9.4, and Sn0wbreeze V1.5, to make them compatible with the latest iPhone OS. iPhone 3G 05.08 bootloader users who have accidentally upgraded their firmware to 3.1.3, only later realizing that they are unable to preserve their unlock, can now downgrade to iPhone 3.1.2 baseband 05.12.01, an unlockable version using Fuzzyband Cydia App.

    Here are the steps to downgrade your iPhone 3G to 3.1.2 firmware using Fuzzyband:

    1. Launch Cydia from your iPhone’s Springboard.

    2. Tap on ‘Sections’ tab found at the bottom. Scroll down the list and select ‘System’.

    3. Find ‘Fuzzyband Downgrader’ in the list of packages and select it. Tap on ‘Install’ at the top right, then tap ‘Confirm’.

    4. After the installation is complete, launch Fuzzyband Downgrader from the Springboard.

    5. Fuzzyband will now query your iPhone’s modem and list details, including Boot loader version, Baseband version, and also iPhone OS version.

    6. In case your bootloader is 5.08 you will be able to downgrade your iPhone 3.1.3 to 3.1.2.

    7. Tap ‘Downgrade’ and Fuzzyband will take care of the rest.

     
  20. Hi Apple suck it

    I don’t have Cydia on my springboard. Where or how can I get it?

     
  21. sorry guys if you have the bootlooder baseband 5.0.9 i think now it’s unlockble and maybe will not be for ever , :(
    apple sucks

     
  22. Apple suck it!! says: February 10, 2010 at 9:38 pm

    Hey AJ is your iPhone jailbroken? When you jailbreak You get an option to install Cydia. Find a jailbreak tutorial and the. Downgrade your baseband with fuzzyband 3.1.3-1. But you need to have bootloader 5.08. Or you can use pwnage tool super bowl day launch to jailbreak and unlock. You can find it at dev-team.com

     
  23. just recently bought my phone few day before the update was available. was thinking about jailbreaking and unlocking the phone but never got around to do it but then the update was available i thought hmm! “why not”….BIG MISTAKE.

    goin abroad help, i didnt jailbreake it before, and i updated it to 3.1.3

     
  24. thanks A s i

    It was jailbroken until I was forced to restore after some problem. And now there is 3.1.3 with baseband 05.12.01. And I guess there’s no tool to unlock that?

     
  25. Hi Aj try this link to jailbreak your iphone , its worked for me ;)
    http : // www . redmondpie . com/jailbreak-iphone-os-3.1.3-firmware-with-redsn0w-0.9.4/

     
  26. remember to remove spaces in the link :P

     
  27. Help me all
    My iphone os version 3.1.2 modem firmware 05.12.01 how to unlocking

     
  28. Hi. I upgraded to 3.1.3 by accident because I don’t know anything about this stuff.. My phone is stuck in recovery and needs original sim to activate on itunes (which I don’t have). How can I find out my baseband if I can’t get off the emergency call screen? Yikes..

     
  29. i dont get it.i said that we have to install cydia first right.but my baseband is 5.12.01 then u said there is no way to unclok this baseband.ok now my point is how to get cydia.thats all.someone help me.im new user of this iphone.i just restore as a new user.then it was 3.1.3.
    i need ur help who pro with iphone

     
  30. For all people asking about the new firmware 3.1.3 ( unlock & Downgrade baseband )

    baseband 05.12.01 : all the wold waiting of Dev team after the exploit of Sherrif , so no oen can unlock 3.1.3 with new baseband 05.12.01

    Dongrade Baseband : u need to use Fussyband get from cydia==>search==>Fuzzyband.
    after install start the Fuzzyband ( if u are lucky and u have Bootloader 05.08 u can downgrad but if u have baseband 05.09 software not working for you )

    good luck

     
  31. Hi Every One ,
    I Notice That there is some miss understand here ,
    There is differences between :
    Unlock and Jailbreak

    Jailbreak ==>
    Some iPhone Developers Start develop Applications and Libraries witch extends the iPhone OS But These Applications Need Full Permission to The system layer in your iPhone OS to work and Apple didn’t gives the developers this permission in the iPhone SDK by Default , so some developers create there own programming language called iPhone Open SDK and they create there own store (free store same as AppleStore Server) and there own installer called Cydia (same as AppStore Installer) but all you need to do to make these applications to work on your iPhone you need to hack you iPhone OS witch we called it (Jailbreak)
    - but jail breake your iPhone does not mean that you unLock it to accept any SIM card its just give you the ability to install cydia and others CooooOoooOOooL Applications ;) -

    Unlock = > unlocking your iPhone is illegal thing for apple , so they not allowed the system by default to give you permission to access the SIM information , so you need to jailbreak first and then you can download a tool using Cydia Installer to unlock your iPhone to accept any SIM like “ultraSn0w, blackSn0w ……”, but the problem is that apple start a development war against the dev-team “the jailbreak team” so in the 3.1.3 they do some one-way security hashing in the baseband update witch prevents the dev-team from unlock the iPhone
    i think they can unlock it , but they need to wait until apple next big release for iPhone OS 4 witch they think its very very sooooooooooon
    —————————————-
    sorry for this huge article , but anyway you should jailbreak your iPhone , and waiting for any unlock solution from dev-team , and don’t worry if any one could do it , the news will spread all over the internet quickly

     
  32. Hi Jessica ,
    You can jailbreak it first using the link i wrote it before , and this screen will be removed away without the SIM Card ;)

     
  33. Jailbraking a new iPhone 3.1.2 with blackrain, made a backup upgraded to 3.1.3 got stuck downgrade to 3.1.2 unlock again with blackrain but the baseband stil on 05.12.01 so i was stuck with “no service” resotored the backup, upograded to 3.1.3 and to my surprise it worked.

    So i have got a working iPhone 3.1.3 with baseband 05.12.01, jailbroken and unlocked
    LOL

     
  34. Rein–> how did you downgrade? I also got stuck during jailbraking with blackrain and got forced by iTunes to upgrade… Could you please describe what you did in more detail? When you restored the backup did you still have blackrain on your iPhone? If it worked for you maybe it will work on me too?…:)

     
  35. Hi
    I received an unlocked iphone for xmas, plugged it in to the pc to charge and clicked on some message from itunes – was a bit distracted at the time. Now phone will not work with my tmobile sim card. I am not computer or phone savvy, but will like to get my phone working again. I now have version 3.1.3 I believe, please can anyone help. Should i just take it to be unlocked again?
    Thanks in advance
    Happy valentines

     
  36. Natali-> You have to have “iPhone1,2_3.1.2_7D11_Restore.ipsw” laying around from “http://mytopfiles.com/other/file/iPhone1,2_3-1-2_7D11_Restore/342866.htm” for example, just google you wil find it.
    Then shut down yout phone, hit the start and home buton at the same time, keep holding on the home button and release teh startbutton wen it starts.
    It starts up in restore mode, start iTunes and hit the restore button with shift presed, then you wil be prompted for a backup file select the 3.1.2 restore ipsw file and wait till its done.
    You wil get an error message from iTune, just ignore this.
    Then do the blackrain trick again and voila, yailbroken.

    I dont know of the next things have anything to do with it but afterwards i also installed open ssh, snow, and pushfix (for the youtube bugg)

    rein

     
  37. How do I jailbreak my iPhone 3gs 3.1.3 on baseband 05.12.01

     
  38. Rein—> thanks for your reply and the detailed explanation! Just one more thing- how did you manage to unlock the phone after jailbraking it? I am asking because apparently even if I downgrade to 3.1.2 the baseband stays 05.12.01 which is still tricky to unlock…

     
  39. i do hope the dev team cooks up something to downgrade this blasted iphone baseband… =(

     
  40. Natali -> after jailbraking in 3.2.2 i installed sn0w and upgraded agin to 3.2.3, it worked for me.
    Leaving me with a jailbroken andd unlocked iPhone G3 3.2.3 basband 05.12.01 :)
    rein

     
  41. Hi Natali ,
    the only tool that i know to downgrade your iphone is called fuzzyband , but remember to search about fuzzyband 3.0 not 1.0 , the fuzzyband now support baseband 05.12.01 , but there is somthing else called boot loader , the fuzzyband now support bootloader 5.0.8 , just try it and if you don’t have this bootloader the fuzzyband will tell you that , just give it a try ;)

     
  42. i dont know what i did but after like 3 days of trying to unlock my iphone 3g 3.1.3
    05.12.01 bootloader 05.09… i got it to firmware 3.1.2 but still 05.12.01 and 05.09 is there any way to unlock it now that its on 3.1.2?

     
  43. Fareed–> thanks for your advice! As I know though fuzzyband can be only dowloaded when having cydia on the phone, to have cydia I would need to have it jailbroken and to have it jailbroken I need to downgrade… And the circle is closed:] I think I just need to wait until The Brains come up with the unlocking software for 3.1.3… :( or try what Rein suggests… But I don’t want to mess to much with it – I just got this iPhone and still don’t know a lot about all these jailbraking and unlocking processes…
    Is it possible to spoil the phone if something goes wrong?
    Thank you again Rein and Fareed!

     
  44. Hi Natali ,
    no the circle is not closed, to jailbreak you don’t need to downgrade ;)
    lsn , to jailbreak just restore your iPhone , and search for how to jailbreak your iphone using redsn0w 0.9.2 in google and the redsn0w will go with you throw a simple steps to jailbreak your iPhone , and thanx for the thanx :P

     
  45. Rein — how did you upgrade back to 2.1.3? Using iTunes automatic installer or manually?

     
  46. Hallo ik ben Nasir,

    als ik eerlijk mag zijn vond ik, de verhalen die jullie allemaal hebben meegemaakt
    echt fijn, heb iphone 3G dat vroeger 3.1.3 had dan gejailbreakt via redsnow 0.9.4 naar 3.1.2 met baseband 05.12.01, heb alles geprobeert om de baseband te downgrade naar 05,08, maar het lukt niet want ik heb de 05,09

    omdat er nog niks is gevonden om naar 05,09 te downgrade

    dus wat ik jullie allemaal voorstel is: als jullie de zelfde problemen hebben
    Wacht <Gewoon af tot als dev-team iets heeft gevonden

    maar wat ik julli wel moet vertellen is dat dat ik vorig week een iphone 3G die met firmware 3.1.3 and baseband 05.12.01 heb gehad in mijn handen, de eigenaar van deze iphone heeft een verkeerde manipulatie gedaan heeft, zodat zijn iphone niet meer werkte maar helemaal niet werkte hij ging niet aan, def mode en al die toestanden, en werd ook niet herkent via de pc,

    dus ik heb itunes verwijdert (unistall) en trg opgezet
    ik drukte de home button en steekte de usb in

    toen werd de gsm herkent, en kreeg ik te zien op itunes dat de iphone Geactiveert is unlock
    voor eender welk simkaart

    Ik vraag mij toch af wat er allemaal in godsnaam is gebeurt???

    dit is gewoon ongeloofelijk, ik snapte er niks meer van,

    dus nu probeer ik met mijn iphone ook te kunnen blokkeren op het zelfde manier hoe deze persoon heeft gedaan en is te proberen, maar hou mij aub op de hoogte als er iets nieuws is

    dat nuttig kan zijn voormij

    alvast bedankt

     
  47. Fareed–> thanks again!;) I will try it and let you know how it went! As I am new to all this I am a bit afraid to do complicated things with my iPhone, i just wish the Dev Team unveals us the new software soon!… :)

    Jordan–> once you have a jailbroken iPhone 3.1.2 you upgrade using a program released by Dev Team I guess, without loosing your jailbreak and unlock!… I just checked- it’s called PwnageTool 3.1.4. It is a custom upgrade, not via iTunes. Good luck!

     
  48. Hi Natali — I still don’t see how it’s possible to unlock baseband 5.12.07, having accidentally upgraded (my unlocked phone was crashing constantly and rebooting, so I was trying to restore, and failed to click “alt” to select the custom firmware upgrade). I don’t understand what Rein did to upgrade back to 3.1.3 — when I try that, I just end up with a locked and unjailbroken phone again.

     
  49. Just found out that Fuzzyband doesn’t work for iPhone 3GS…

     
  50. Farid: using fuzzy dwngrder. Says I have bootloader version 06.02. Now what to do???

    Thnkx.

     
  51. Dev Team,

    Anything we can do to help? Any kind of mass data analyzer similar to SETI at home that would help with code? If you need a guinea pig phone let me know, as mine is currently locked at 5.12.01bb. Good Luck!

     
  52. hi same here someone sold me unlocked i phone but the b/b is 5.12.07 and the firmware is 3.1.2 can someone help me with this

     
  53. Hi everyone,

    I need some help/clarification – I have a 3.1.3 iPhone (firmware 05.12.01 – baseband 05.09).

    I ran Fuzzyband, and it says my phone is not supported. Is there ANY other way to unlock this thing?

    I am now phoneless, since my crappy phone broke, and I am now stuck with a TMobile sim, and can’t use it on my iPhone.

    Any help is appreciated.

    Also, after the Sn0wbreeze jailbreak, I lost all my apps and address book info. Can this be recovered without reversing the jailbreak?

     
  54. short question, does anybody know if it`s possible to format an iphone completely, with any softwaretool f.e., including the modem fw, or is the modem fw locked with the hardware and not at all deletable? (like i guess it`s the case with the bootloader…)
    (i guess that i`m not the first who thougt about that solution to unlock an iphone with updated modemfw)
    anybody who tried this?

    iphone 3g, fw 3.2 custom jailbraik, modem fw 5.12.01 bootloader 6.02

     
  55. hi, i’m gladys from philippines. and my aunt gave me thios iphone 3g on 3.1.2 and i upgraded it accidentally to 3.1.3, now my phone is stocked and have nothing to use, my aunt used to unlock her friends phone but what she was doing for them didn’t work for me..i really feel so upset. now my only option is to give her back the phone she gave me and let it be fixed back in US if that’s possible, or decide to leave the phone with me and wait until it is possible here in the Philippines to unlock that version. we have already installed cydia, afterall. i just don’t know what to do next..is there any one out there who could help me?..thanks!

     
  56. gladys ,im from the philippines also…you have to wait dev team is working on it and it is possible to be unlock…patience…

     
  57. Blacsn0w not working on 3.1.3 base-band 5.11, Every time my iphone 3g freeze.

     
  58. hy. ive recently updated my iphone 3gs to 3.1.3. i have it activated. is there any way to install cydia on an official firmware so i cand downgrade the modem fw?

     
  59. vlad try redsn0w

     
  60. WELL MY IPHONE UPDATE TO 3.1.3 AND I HAVE TMOBILE AND ITS HARD TO UNLOCK

     
  61. CAN SOMEONE HELP ME PLZ I NEED MY PHONE O WORK AGAIN

     
  62. REIN —- PLEASE REPLY
    If I follow you well, this is what you did?

    1. Jailbreak to 3.1.2 using iTunes restore of a file ‘Phone1,2_3.1.2_7D11_Restore.ipsw’ (blackrein) and made a backup in iTunes – WORKING
    2. upgrade to 3.1.3 in iTunes – STUCK
    3. Jailbreak to 3.1.2 using iTunes restore of a file ‘Phone1,2_3.1.2_7D11_Restore.ipsw’ (blackrein) and restored previous backup from iTunes – STUCK
    4. Jailbreak to 3.1.3 using iTunes restore of a file created from 3.1.3 image using snow – WORKING

    Basically, after your 3.1.3 auto update from iTunes you got stuck as everybody else.
    You Jailbreaked your previously working image and restored from backup, but was not working due to the baseband stuck on 05.12.01.
    So you decided to jailbreak to 3.1.3 using snow which to everyone’s surprise worked!!!

    Is the above correct? Correct me please.

     
  63. iPhone 3G 3.1.3 with 5.12.07 doesn’t have unlocking program yet!!
    I have an iPhone 3g that I updated to 3.1.3 but with bootload 5.12.07. I jailbroke it with a costum firm from sn0wbreeze using ireb to fix the itune problems of restoring. the thing is can’t unlock it neither with blackra1n nor ultrasn0w from the cydia. I couldn’t even downgrade using fuzzyband to get to 4.8 or something lesser. Anyway I heard somebody is working on this 5.12.07 version and had a fix for it but there’ll any release soon?

    What’s the new in this 3.1.3 version anyway coz I coudn’t see any difference from 3.1.2????

     
  64. not worth upgrading to 3.1.3. Minor changes
    Keep your eyes on Cydia it will inform you of the unlock when it is available

     
  65. philip santoso says: March 7, 2010 at 11:41 pm

    I got iphone 3 g with firmware 3.1.3 and got locked …. i went to local store which I trust .. they said nobody can unlocked 3.1.3 yet …. is that true ? … thx for reply !

     
  66. DON’T BE LAZY !!!
    yes, it is true, but it depends on which version of baseband. read at the very top.

    Now we have 2 options for unlocking, and it all depends on your baseband model:

    * If your baseband is still at 04.26.08, then you may use UltraSn0w.
    * If your baseband is at 05.11.07, you may use BlackSn0w.
    * If your baseband is at 05.12.01, you cannot unlock at this time. No one knows if we’ll ever be able to unlock this baseband.

    not worth upgrading to 3.1.3. Minor changes
    Keep your eyes on Cydia it will inform you of the unlock when it is available

     
  67. when i jailbreak my iphone i download cydia then i go to source the i add blackra1n.com and i download blacksn0w .when its download blacksn0w it was reloading and its stuck then my iphone turn off and i open it and its stuck on the apple logo!!!!!!! what im gonna do

     
  68. Vishal Jain says: March 11, 2010 at 12:33 am

    Hey..
    i have IPHONE 3G that has version 3.1.3(7E18) and modem firmware is 05.12.01..i have jailbreak it before using REDSN0W…

    I read your article regarding downgrading the iphone of 05.12.01 to 04.26.08 and then to unlock it through ultrasn0w but i am bit afraid of doing that, considering the fact that i heared from my friends that degrading IPHONE will make it completely DEAD…

    So please let me know is it fine enough to degrade the IPHONE firmware from 05.12.01 to 04.26.08 .. If i degrade today, will i face any problems in future in upgrading or something..

    MY bootlloader is 05.08….

     
  69. Vishal Jain says: March 11, 2010 at 12:37 am

    I read ur article regarding degrading at http://www.iphonedownloadblog.com/tag/downgrade/

     
  70. Vishal Jain says: March 11, 2010 at 12:44 am

    one more ques i wanted to ask is,,,

    After unlocking, will my iphone be able to work on AIRTEL connection.I gota AIRTEL connection.
    Actualy i know about TMOBILE which works after unlocking the IPHONE,.

     
  71. Iphone3g – you should be able to bring back your phone by putting it in update mode and connecting it to iTunes. It will recognize it as being in update mode and offer to flash it for you with the latest firmware. If it already has the 3.1.3 you can go ahead and flash it. It will reboot in the locked state ofcourse. Then you can try jailbreaking/unlocking all over again. I suggest the latest version of redsn0w for jailbreaking. It worked for me after facing the same problems as you.

    vishal – If you accidentally updated your iPhone 3G to 3.1.3 and lost your unlock, you’re in luck! There is now a way to downgrade iPhone baseband 05.12.01 to 04.26.08 in a few simple steps thanks to Fuzzyband, an application available through Cydia.

    Please note that this only works with the iPhone 3G on OS 3.1.3 with baseband 05.12.01 and the older bootloader 05.08. Let me repeat this so it’s clear. This trick will only work for iPhone 3G 3.1.3 baseband 05.12.01 with bootlloader 05.08. This will not work for the iPhone 3GS.

    If you’re not sure about your bootloader, simply download and launch Fuzzyband and it will give you more info about your bootloader.

    The above did not work for me as I have 5.09 bootloader. I am still waiting for an unlock.
    I do not know about airtel.

     
  72. Vishal Jain says: March 11, 2010 at 1:50 am

    Thanks for your supportive comments..

    A little thing i need to clear is…
    if i downgrade my IPHONE to 04.26.08 and unlock it with ultrasn0w.. Will i able to upgrage my IPHONE again back to 05.12.01 if my AIRTEL connection doesnot works…

    Another thing is that i have JAILBREAK my IPHONE using redsn0w 9.2… Is it okay or do i need to upgrade it to the latest version redsn0w 9.4…If yes then how can i upgrade it to 9.4..

     
  73. hey,
    I tried downgrading my iphone 3G from 3.1.3 to 3.1.2. using the restore button on itunes and it still said there is error 1015. However i was wondering if there is any way to activate my phone in the meantime cuz it still says that I need to get a proper simcard on itunes. Any help please??

     
  74. Hey my modem firmware says 04.05.04_G . What does that mean?It’s also a 3.1.3. (7E18). How do I unlock it? Do I have to jailbreak it first? Sorry, I really have NO clue abou that kinda stuff, I just happened to get the old iphone from a friend of mine….

     
  75. Jailbreak first, unlock later. you need a lot of reading to do. If you are on OS 3.1.3 with baseband 05.12.01 and the bootloader is 05.09 you have to wait for an unlock, but for now you can jailbreak with redsn0w 0.9.4. In all other cases you can jailbreak and unlock.

     
  76. On a personal mission today to find all the sites that claim this and assure all readers, 100% that this does NOT work. Sn0wbreeze will work fine, Itunes restore of custom IPSW will work fine, your baseband will not be touched during the process. When you install Blacksn0w your phone will freeze at the Cydia screen. Then when you go to reboot, it will stay stuck on your boot logo and never turn on. Learn from my mistake, I now have the world’s most expensive Ipod because of sites posting this and not doing the legwork.

     
  77. okay but what’s the difference between jailbreaking and unlocking? sorry basic question, but again, I’m the oposite of a computer nerd.

     
  78. And thx Adrian.
    And how about if I use redsnow 092?

     
  79. Hi,

    Thx for the updates, can you tell me if sites like iphoneunlach , iphone3gunlock are legitimate. I don mind paying them for unlocking. Just want to make sure they are not a rip-off. Anybody has experience with them?.. Thanks in Advance

    Rick

     
  80. Missed the actual part. I am willing to pay because there is no “free” unlock available for the latest baseband 05.12.01, and these websites claim they can unlock ALL versions
    Any input is appreciated.

    Thanks Again
    Rick

     
  81. Earlier today I paid $30 for the automaticiphoneunlocker.com advertised on THIS PAGE which says “3.1.3 Unlock Available Now”. Thats not true and they havent replied to my email (though that was just 7 hours ago so maybe …….)

     
  82. @Seamus

    Thanks for ur reply… I hope they are not a rip-off… keep ur fingers crossed… and keep us posted so that nobody falls in for these online rip-off shops.

    Thanks Again

     
  83. HEY THIS IS URGENT!! I DID EXACTLY WHAT YOU SAID, I DOWNGRADED TO 4.26.08 ON ON MY IPHONE 3G 3.1.3 AND I DOWNLOADED BLACKSNOW ON CYDIA AND IT FROZE THEN RESTARTED AND NOW ITS STUCK ON THE IPHONE LOGO AND THAT LOADING CIRCLE THING COMES UP TO! WHAT DO I DO?

     
  84. read my earlier comments

     
  85. All these websites where they offer to unlock for money are scam! Read the dev team blog:

    http://blog.iphone-dev.org/

    If you also google the names of these websites and look for reviews in forums you’ll see what I mean! They just cheat people because they know that they are in trouble with a locked iPhone!… I was ready to pay but when I did this research I changed my mind. So, I wait …

     
  86. Hi, I am thinking of purchasing a phone from a friend and he had at&t with the 3g for about a year or so and now since he resorted he thinks its back to the 3.1.3 firmware. He wont be able to put in a at&t sim because he doesn’t want to activate it. If I purchase the Phone, I am planning on using it on the Tmobile network. Will I be able to unlock and jailbreak it without knowing the band < ?

     
  87. OK guys, maybe someone can help me on this matter. Although i read all the post, i still did not find an answer to my question. Here is the situation:
    I have an 3gs iphone, with the 4th and 5th number in the serial number being 36.
    I bought it with version 3.1.2 and unlocked it, after which i could not resync it with my itunes, it did not erase previous applications from it, and it did not install mine.
    I had to go into setting, general, erase all content and data, hoping this will help. Once i did that the phone got stuck into booting and having the apple sign on the screen.
    I tried restoring to custom 3.1.2, but did not work. Looking online i found a custom firmware 3.1.3 that i could install on the phone, and now the phone has 3.1.3, with modem firmware 5.11.07.
    The custom firmware 3.1.3 has the phone already jailbroken with cydia on it, which allowed me to install apps. Online i read that ultrasn0w can unlock this firmware by installing it from cydia.
    I tried that, but after installing ultrasnow, the phone gets stuck again with the “return to cydia” screen on, after which restarts on it’s own and get’s stuck on the black screen with apple sign on.
    I tried the procedures abut three time with no luck. Is there any other way to unlock it?
    Right now i have 3.1.3 custom firmware with a jailbroken phone, but no unlock.
    Please help
    Thanks

     
  88. when can i unlock my iphone 3gs 3.1.3???????????

     
  89. Hey for those who have a 2G 3.1.3 you can unlock it with redsnow 0.9.4 There are descriptions on youtube. You’ll also have to download some other files, but again, check youtube for that. Only works on 2G phones though. So good luck!

     
  90. Yeeeeeaaaaa!!! Perfect!!! Yes we can… Thank you Sebastien!!
    I unlocked an 3G Iphone, but I have an other Iphone 2G, this iphone are unlocked, I use the firmware 3.1.2, but de WI-Fi don’t works, You know why?
    I saw that when I unlock the iphone wi-fi works, the problem is when it synchronises, Wi-Fi no longer works
    Thanks for your help!!!

    Pepe

     
  91. hi guy….

    I’m trying to unlock my iphone 3gs frimware 3.1.3 modem frimware 05.12.01 past one month…. even i spend a whole day to unlock my iphone.. but i couldn’t… now every body saying that it can be unlocked, its on the way… but anybody say exactly when it gonna come because… i’m waiting for long time even i made a promise that after unlock my iphone n with my unlocked iphone only i’ll talk to any one….. so plzzz try to help me to unlock yar…

    I’ve other prob’s actually i downgrade 3.1.3 to 3.1.2 n i jailbreaked also but i couldn’t unlock it tht was happening now… in tht my wifi was working one day after that it’s not working now so anybody help in tht also plzzzz yar…

    thank u buddy….

     
  92. Victor:

    Where are you from? Well, the problem, I think, is de iphone model, as I know, in this moment is imposible to unlock the Iphone 3GS, it is correct?
    Could you try the method above described??
    Regards

     
  93. Vishal Jain says: March 22, 2010 at 7:38 pm

    Please let me know if IPHONE 3G 3.1.3 with firmware 5.12.07 and baseband of 3.9 can be unlocked,,,

     
  94. Vishal Jain says: March 22, 2010 at 7:41 pm

    sorry for the incorrect information provided…

    my IPHONE is 3.1.3 with firmware 5.12.01
    Bootloader 5.09

    can it be unlocked??????????????

     
  95. Jain,

    Yes, last week I try de method above described and my iphone 3G with the firmwere 3.1.3 are unlocked
    Try the method, it’s works!!

     
  96. I just bought an Iphone thats unlocked from this guy who was selling it. I didn’t realize it couldn’t be unlocked/jailbroken! I’m so sad now! I really wanted to unlock/jailbreak it since my blackberry is a piece of shit!

     
  97. Let me clear things up…. iPhone OS 3.1.3 with 05.12.01 baseband and older bootloader 05.08 CAN be jailbroken and unlocked with a baseband downgrade by Fuzzyband on Cydia. If you have bootloader 5.09 and higher, there is no unlock yet. So if you have one of the first batches of 3g iphones you can most likely unlock it. Best of luck with everyone else, including myself :-(

     
  98. Vishal Jain says: March 25, 2010 at 3:18 am

    Hey John..

    Do u have any idea when the IPHONE with bootloader 5.09 can be unlocked,,

    i got iphone 3.1.3 with 05.12.01 baseband & bootloader 5.09.. I have been waiting for the unlock, for quiet of some time …

    Please let me know..

     
  99. How do you know what bootloader you have?

     
  100. Vishal Jain says: March 25, 2010 at 11:03 am

    i got check it out by downloading fizzyband from CYDIA..

    Fizzyband tells about the bootloader version…

     
  101. Im really confused…I bought an iphone a few days ago, and I saw that it had the upgrade 3.1.3 with a 5.12.01 firmware,but I don’t know what bootloader it has. Where can I go to check what bootloader I have, and if its capable of being unlocked where can i go to get all the required downloads to unlock my phone?

     
  102. GEOHOT will do it again while the posers of devteam are doing nothing sitting on their butts, geohot, will JB it and UNLOCK!!! he is the one that need to be posting info, not those posers, beside if you post something that is not hat they want in their blog, they treat people rude and without education, the others and the “administrators” DEV TEAM= Fake so after GeoHot does it…they will do it, probably they copied what he does…

     
  103. HEY ABJ

    First off all.. you have to Jail Break your IPHONE through CYDIA…….

    THen download the software FIZZYBAND…

    MAy be this video help you…

    http://www.youtube.com/watch?v=VQXhI32GtGo

     
  104. Hello, I got new iphone 3gs 3.1.3 but i cant unlock it iam located in Mongolia

     
  105. have an iphone 3g downloaded 3.1.3 version with a baseband 5.12
    ne ideas how to unlock this one plz help

     
  106. alaine baco says: April 5, 2010 at 6:22 am

    hi sebastian, can you pls advise me if this procedure works on my iphone 3g with firmware 3.1.3 and with bootloader 05.09 and baseband version 05.12.01

    thank you so much..your response will be appreciated

     
  107. Hi,

    I have a 2g and I accidentally downloaded the 3.1.3 update and now i am screwed (grrrrrrrr). I tried to follow this procedure but when I browse to add 3.1.2, redsnow says it doesnt recognize it. Any advice??????
    Please help!!!!!!!!

     
  108. I have iphone 3.1.3 baseband 05.11.07 and tried with blacksnow. the result is horrible : my iphone cannot reboot. “SystemShutdown false” it try to reboot but always with the last sentence : system shutdown false!!!

    please could you help me????

    yaya

     
  109. Hello,

    If I understand, still now unlock possible for Iphone 3g firmware 3.1.3 basdeband 05.12.01 bootloader 05.09 ? since february ?!

    Thanks

     
  110. Hello

    I have iphone3g 16gb having 3.1.3. and its showing only emergency calls & not able to go into the menu or other screen except info..
    \

    could any one help me how to jailbreak and unlcok this.. i tried my best with snowbreeze and blackran1r3

    thank you

     
  111. Sundeep,
    Most probably, you are hosed. 3g phones cannot be unlocked, i believe with 3.1.3.

     
  112. I have an iphone 3g which i updated to 3.1.3 recently and jailbroke it using pwnage tool. It’s baseband is 5.11.07. I tried to unlock it a couple of times using blacksn0w, but every time i install blacksn0w and reboot the phone, it doesn’t start… It freezes at the pineaple logo… what does this mean?

     
  113. I got my iphone 3g in jan. I updated it to 3.13on accident in feb. I have tmobile I want to know should i sell it or wait for the new unlock to come out, and does any1 know when or if that will come out.

     
  114. Same problem as others with 3.1.3, baseband 5.11.07 and blacksn0w. It freezes on boot. You need to remove your instructions for using blacksn0w with 3.1.3. It doesn’t work, and the phone won’t even boot.

     
  115. I have a big problem here CAN ANYBODY HELP ME……… I need to unlock my iphone 3g its running on 3.1.3. After it was have some problems i was forced to restore and apple put it on 3.1.3 without asking me. Now i cant find anybody that can unlock it or even if somebody knows how to. If you are the one who knows how please reply to me as soon as possible i am willing to pay 50 bucks to somebody that can come to my house or tell me how to do it myself over the phone. If this Unlocking device didnt come out soon i will need to know when it will come out and if not soon i will sell mine for 375 cash and get another one that is already unlocked and jailbroken on 3.1.2 or lower. If you have one up for sale like this then send me an email at spasojea@Yahoo.com and tell me what the condition is and how much you are asking. Thanks for repling to me.I LIVE IN ST.PETERSBURG, FLORIDA. I NEED HELP……………..LOL.

     
  116. hi i have 2 iphones 3g 3.1.3 8gb and 16gb and i want them for use of tmobile,
    i went to a lot of places to unlock them but they said
    that they still cant unlock that version what can i do ???

    do i need to sim card from tmobile for the moment i unlock them??

    please help !!!!! thanks

     
  117. hi i have 2 iphones 3g 3.1.3 8gb and 16gb and i want them for use of tmobile,
    i went to a lot of places to unlock them but they said
    that they still cant unlock that version what can i do ???

    do i need to sim card from tmobile for the moment i unlock them??

    please help !!!!! thanks
    email me please labebefoxy@hotmail.com

     
  118. Vishal Jain says: April 13, 2010 at 10:05 pm

    hii PAMELA

    May be this video link help u…

    http://www.youtube.com/watch?v=VQXhI32GtGo

     
  119. Just so you know, and you can tell all your friends and w/e

    My good buddy is programmer, and well, we did downgrade iphone 3gs from 3.1.3 to 3.1.2

    took him 1 hour to explain me how, and 5 min to do so.

    good luck

     
  120. dear all,

    hi….after reading all this posted , my problem is still not solve.. please help me. i have an iphone 3g 8g baseband 5.12.01 with bootloader 06.04 with stock firmware 3.1.3. i jailbrake the phone using blackrain software and restore the software to 3.1.2. at cydia, i try to download snow but still cannot unlock. at present, the line just stated no service. so, my i phone has become an i pod. i don’t have any contract with any service provider. i also try fuzzyboard to downgrade the firmware but cannot do it . please advice cause already 1 month crack my head to settle this…

    thank you.

     
  121. juan tamad says: April 29, 2010 at 9:48 am

    only bootloader version 05.08 can be unlock

    and your iphone has 06.04 …. w/c is unlockable by ultranow

    like mine …. it has higher bv 05.09

    we have to wait more days i know dev team is working on this shit

    goodluck

     
  122. To All,

    unlockanyphone.com apparently has come out with a new software that will unlock 3G/3GS 3.1.3 firmware 5.12.01. I’m not jumping up and down just yet because it might be a scam, but there is still hope for us.

    Keeping my fingers crossed.

     
  123. márcio borges says: April 29, 2010 at 4:10 pm

    Alguém tem ja o desbloqueio para 3.1.3 para windows, atualizei perdi desbloqueio, e quero colocar uns aplicativos crakeados, tem como colocar o cydia pelo menos . . .

     
  124. Hi, so does that means that nothing can be done about the 05.12.01 baseband to unlock the phone? And does that means that it’s the only one excluded from this unlocking issue?

     
  125. Hello,
    I have iPhone 3G with firmware 3.13 my bro bought it for me from States and i live in india it has baseband 5.12.01 i tried unlocking it but only got JB Can any 1 help me with this
    Thanks

     
  126. jeff Dimaano says: May 10, 2010 at 8:16 am

    still theres no update from dev team.. unlocking 5.12.01 is still a piece of shit.

     
  127. hey you guys i been trying to do this 4m almost 3 days ive managed to jailbreak the 3.1.3 firmeware but my baseband is 5.12.01 and boot loader is 5.09 if any one knows how to unlock this shit head loader plz tell me vai email thanks very much any help would be appreciated………………………..
    :( (

     
  128. kindly help me plzzzzzzzzzzzzzz im dyinggggggggggggggggggg

     
  129. jeff Dimaano says: May 10, 2010 at 6:32 pm

    there no update yet..same as i encounter but you can you use spirit to jailbreak 3.1.3

     
  130. I am on the same boat, just singed up on this blog to see when it will come out..

     
  131. unlock of 5.12.01 available with bootloader 5.09(using spirit beta 3.112.12)
    Step 1 update to original 3.1.3
    step 2 jailbreak with spirit beta 3.112.12(if its says unknown error then its ok)
    step 3 turn off
    step 4 wait for 1 day or remove cover& take out battery, place battery
    step 5 insert sim, its done

     
  132. James,

    Can you go in to more detail please? Where do you find spirit beta 3.112.12?
    thanks!

     
  133. This is the link-’Forsures’

    http://rapidshare.com/files/386838469/Spirit_beta_3.11.exe.html

    Note the final version has not been released yet,
    if your system crash or what ever harm it made then i’m not to be blame.
    download own your own risk.
    Thnx

     
  134. Hi, my 3g phone is jailbroken and wondering if I unlock it with the network provider (o2), I may be able to tether? Can anyone pls confirm if this is possible?

     
  135. Hi everyone i have an iphone 3g witch has an version 3.1.3 with firmware 05.12.01 i juat did jailbreak but im not able to unlock.. N i was thinkin to do an downgrade if doesnt work the downgrade.. What i should do to unlock my iphone… If anyone can help me plz… Thanks i appreciated it….

     
  136. jt green says: May 18, 2010 at 2:23 pm

    my thang is 04.05.04_G please help

     
  137. trying to use blacksn0w but every time i get to the reload page in cydia the the Phone frezzes, any Sugggestions??

    thanks in advance will

     
  138. jose luis says: May 20, 2010 at 9:04 pm

    sres no pierdan tiempo esperando respuestas de estos giles vayan al lugar de su ciudad donde vendan varios articulos en el ecuador se lo llama la bahia se que en sudamerica ellos desbloquean cualquier iphone tenga la banda q tenga ya que ello tienen distribuido un programa hasta las huevas

     
  139. On my 3g 3.1.3, I used ”Fuzzyband” to downgrade to Modem Firmware to 04.26.08 in order to unlock.

    I tried installing repo666.ultrasn0w.com through Cydia and the response is: POSIX: Connection refused.

    What next?

    I appreciate any help.

     
  140. To Cetusra:
    if the purpose is to unlock it rouse on other network, what I know is you contact your network providers like o2 and they will unlock it for free.
    However, if u want to use it for tethering, u don’t really need to unlock it as it can be done by adding “sinful” to your resipotory and after, searching for PdaNet, install and job done! I can tether with mine and it works fine.

     
  141. Samuel peter says: May 23, 2010 at 11:23 am

    ihave iphone 3G,version 3.1.3, modem firmware 05.12.01,its need unlock,jealbreak its appearing iphone,but the sim card dose not working,so ineed help plz.

     
  142. please tel me can we unlock 3g 3.1.3 iphone

     
  143. Samuel peter says: May 24, 2010 at 12:28 am

    How to unlock my 3G iphone dear friend,plz give me the solutions .

     
  144. binosnake says: May 24, 2010 at 11:31 am

    i bought a i phone off a mate and it was jail broken and i up dated it on itunes to 3.1.3 WHICH WAS A BIG MISTAKE but now my sim is locked out it says sim locked insert a valid sim with no pin lock to activate i phone please can some one help help help im stuck

     
  145. Hey guys,

    i have a iPhone 3.1.3 unlocked baseband 05.12.01 bootloader 6.02

    I was able to downgrade my iphone’s boot loader to 5.8 and the baseband to 05.11.07 then unlocked my iPhone 3.1.3

    hahaha don’t worry guys, its not forever that we wont be able to unlock our iPhones.
    i was stuck for like months but now i found a way. :)

    if you don’t believe me, add me on skype: jamiewongsoccer or MSN: jamiewong_ycis@hotmail.com

     
  146. James how did u downgrade ur bootloader

     
  147. slimshady90358 says: May 26, 2010 at 10:57 pm

    Hi., IF YOU WANT TO GET INSTRUCTIONS ON HOW TO ULOCK IPHONE WITH FW 3.1.3 BB 5.12 AND BL 6.02 “BUT NOT 6.04″ .THEN SIGN UP TO THIS LINK “http://www.newogle.com/share-user-slimshady90358.htm ” AND I WILL SEND YOU THE STEP BY STEP INSTRUCTIONS .
    THANK YOU
    GOOD DAY

    SLIMSHADY

     
  148. forsures says: May 27, 2010 at 8:55 am

    hey slimshady,

    I went on the link, please send me the instructions! email is royforberg@mac.com

     
  149. I need 5.12.01. 3.1.3 3g to unlock
    please help I m waiting from long time

     
  150. hey slimshaddy i have allready signed but still awaiting yet or very frankly you dont have the unlock …………………….

     
  151. I have 3g iphone with 3.1.3 bootloader 5.09 and modem 5.12.01 is here anyway to unlock my iphone??

     
  152. slimshady90358 I signed up for the website please send instructions on unlock I have 3.1.2BB 5.12 AND BL 6.02 send instructions to momo12_99@yahoo.com thanks

     
  153. hi slimshady, ive registered 3 times, send me instructions please, i have 3g 3.1.3 6.02

     
  154. Hey guys, this one is for real. All you need to do is wait until the end of the month (Confirmed) and there will be a solution to unlocking the 3.1.3 with any firmware for use with any sim card. If you do not believe me check it out here: http://www.iphonedownloadblog.com/tag/musclenerd/ is please just wait 3 more weeks people. Thank you DEV TEAM!!!!!

     
  155. does any1 know if an iphone can be used and be connected to itunes without any phone service? i currently have the 3gs but no service and was not able to connect to itunes…

     
  156. will not unlock tried everythin even brought it into a shop and got my mate hes an apple rep an still couldn unlock it am at my wits end can anyone help me

     
  157. I’m new at this so please help….some people say that its possible to unlock a iPhone 2g on 3.1.3 and im talking about unlock not jailbreaking…..so is it true that you can unlock an iphone 2g on 3.1.3

     
  158. How to jailbreak iPhone 3.1.3 with 5.12.1 base band

     
  159. Hey Dex you can jailbreak your phone but you cant unlock yet… we are all waiting for dev team to do it..

    i think they have it done but waiting for something…

     
  160. simant shah says: June 16, 2010 at 12:46 am

    Hi all,

    I need to unlock Iphone 3.1.3 modem firmware 5.12.1 !!!
    once soluation comes ….pls. buzz me on mail.

     
  161. I have a 3G iphone which had the software of 3.1.0 installed on it and last week I upgraded it to 3.1.3 through itunes and since then it has been locked and won’t do anything.
    Can anyone help me how to unlock my iphone please?

     
  162. Well Saeid…
    I’m so sorry but for now there is no unlock available.
    May be in one week (more or less) the dev team will be releasing it.
    But don’t worry musclenerd(a popular iphone hacker) confirmed that the unlock is ready & they are just waiting for iphone4 coming out on the market.

     
  163. hey. slimshady90358
    I have the iPhone 3g 3.1.3 baseband 05.12.01 and the bootloader is 06.02
    can you send me the instructions to my msn. davidc9415@hotmail.com
    thanks

     
  164. I accidentally installed the new firmware before jailbreaking or unlocking my iphone.. is it possible to get it back to 3.1.2 or to still unlock the phone?
    please..

     
  165. my iphone is locked and I don’t it’s base band. How can I find out which base band does my ipohone have. I upgraded from 3.1 to 3.1.3 and the iphone is 3G. please help

     
  166. Hai Guys,

    I just found a solution for unlock iphone 3g/3gs 3.1.3

    check this out : http://www.youtube.com/user/AlexZarz#p/u

    I think this is only the tool unlocks the iphone in baseband 05.12.01
    and ..it worked for me and my friends..

    I just like to share with you guys

    Cheers :)

     
  167. Hey HardCow…
    Does this work for Bootloader 5.09???

    If so I will double try it again.

    Thanks

     
  168. if you all haven’t notice they have released the new version of ultrasn0w which can unlock baseband 4.26.08 to 5.13.04

     
  169. “if you all haven’t notice they have released the new version of ultrasn0w which can unlock baseband 4.26.08 to 5.13.04″

    John,

    You are my new hero!

     
  170. I have confirmed the new ultrasn0w works. I am using my 3g 5.12.01 with T-MOBILE

     
  171. As of writing this I just unlocked my Iphone 3g for t-mobile. I was trying to unlock my phone so that i could give it to my friend when i get my iphone 4. I couldn’t get it to work at first so all i did was reinstalled it this time with the T-mobile sim card in it and it worked like a charm. I noticed if after the reboot you get the NO Service at the top just wait it out and you will see the EDGE icon pop up and then the carrier will show. I works fine and I was able to call my mum using his sim and his # appeared and everything.

     
  172. wwwwwwwwwwwwwwwwweeeeeedddddddddded

     
  173. i just unlocked my iphone 3gs 3.1.3 firmware with 05.12.01 baseband following your procedure and it WORKED!!!!!!!!!!!
    THANK YOU!!!!!!!!!!!!!

     
  174. Hardgod:
    I just followed the video and it doesnt work..I have a 3Gs 05.12.01..

    The tutorial show on a MAC and i use Window PC..How can I click run as Administrator mode when using Windows..Something isn’t right..

     
  175. Vishal Jain says: June 22, 2010 at 9:16 pm

    Dear All

    I have a IPHONE 3G ,version 3.1.3(7E18) and modem firmware is 05.12.01…

    Boatloader 5.08

    Will the latest version of ultrasn0w UNLOCK my iphone?? ,,,

    Please let me know!!!!

    Thanks

     
  176. Do anyone try the version 4 software?

     
  177. UNLOCK IPHONE 3.1.3 3G is now released by DEV team

     
  178. Svetislav says: June 24, 2010 at 2:21 am

    iPhone 3G 3.1.3 firmware with 05.12.01 baseband and 05.09 BOOTLOADER!!!
    IT WORKS. I have just unlocked mine. I have searched for ultrasn0w on cydia, installed it, reboot…and it WORKS NOW!!!

     
  179. paul mc govern says: June 24, 2010 at 9:01 am

    hi sorry im blondie but what the hell do i do i got i phone 3g and it was jail broken i up graded it on itunes silly i know but hey it locked the chip and the phone is block i know the new unlock is out but im not sure how to do it can some one send me a link or something with step by step instruction on it of were and how to fix my phone thanks to anyone that can help

     
  180. Vishal Jain says: June 24, 2010 at 10:11 pm

    ULTRASN0W works for iPhone 3G 3.1.3 firmware with 05.12.01 baseband and 05.09 BOOTLOADER!!!

    CHEERS to ALLL!!!!!!!!!!!!!!!!!

     
  181. Samuel peter says: June 25, 2010 at 5:40 am

    wow wo wow ihave unlock my iphone 3g now its work good my dear its nice thank to devloper,its great6

     
  182. Robert – I have a 3gs 3.1.3 05.12.01 too,
    which procedure did you follow to unlock yours?? Could you please post a link to the website you used?

    HardCow – is this link a joke or what? There is no concrete information (what program to use and where to download it) at this link to unlock an iPhone!…Please don’t waste people’s time!

     
  183. Hai Natali ,

    Do you have pain in your ass ? no.. I just want to know ..coz you are asking me a stupid question.
    I just found this video and liked to share with you guys. I don’t wana waste your time.
    If you like just try it. If you don’t like shut your ass and do your job.
    Don’t come and blame on me ..
    By the way. Details are in the description of the video. There is a download link too.
    You can download that unlocker application.:)

    Have a great one ;)

     
  184. hey plllzzzzz if anyone knows how to do it give me a txt or a call8134795710

     
  185. jesus fernandez says: July 6, 2010 at 8:35 pm

    blacksn0w presents some problems

     
  186. sumita seth says: July 7, 2010 at 3:52 pm

    Hey Guys,

    I have iphone with Bootloader version 6.04, Baseband 5.12.01 and OS version 3.1.3.

    Now will ULTRASN0W work for above specifications ?

    Thanks.

     
  187. Adel Ejjeh says: July 12, 2010 at 5:15 am

    Hey guys, I updated my iphone 3g to firmware 3.1.3 and I was able to make calls normally without unlocking it (I didn’t jailbreak it even!), why is that?

     
  188. Just Unlocked and iPhone 3Gs firmware 3.1.3 So simple… THANK YOU GUYS!…. Let me know if I can Donate in some way some money plz

     
  189. Hi all,

    I have a question.
    I have a iPhone with:

    - firmware 3.1.3
    - baseband 5.12.01
    - model MC137
    - bootloader 6.04

    Now it is stuck at the “Slide for emergency” “Connect to iTunes” mode, and i do not have the original sim-card.

    What can/must i do to activate the phone, and make it useable with every sim card?

    Help will be very appreciated and a donation will be made

    Greetz

     
  190. Can we unlock iPhone 3GS without that Cydia thing? because there’s no Wi-fi spot where I live.

     
  191. @Luc Oversloot : First you need to know your original carrier. then insert their SIM card into the iPhone and hey presto, it’s activated! Now you can use it with either that Sim card or without any.
    Second step is jailbreak it with Spirit.
    Third step is unlocking :)

     
  192. you know guys ,ihave unlock my iphone 3G on 22 june 2010,now its work properly,but igot problems in network connections its not work except the wi-fi its work,but the celluar Data dose not working,idont know ,how to solve it my dears,,,plz plz plz give me helping.

     
  193. this shit is the bomb

     

Your Comments

Leave a Reply




Submit Comment